Stepper Motor Control with GUI in Matlab 7.1.
For more information, visit: http://www.matpic.com
Stepper Motor ToolBox gather several funtion to create velocity profiles and render simulations using stepper motor dinamics. The stepper model was developed in simulink and solved using ODEs.
VCL for motion control and industrial automation. Supported hardware: Delta Tau and Motion Engineering.
Arduino (www.arduino.cc) is a low-cost open-source electronics prototyping platform.
MATLAB Support Package for Arduino (also referred to as "ArduinoIO Package") allows you to communicate with an Arduino Uno or Duemilanove...
Hey what up?
Here s my tiny project code which tracks the real time moving object using any webcam or surveillance cam ,it can we wireless as i used wireless surveillance camera which is mounted on the stepper motor to track the object even...
The 3 phase induction motor is modeled to accept the No-Load & Blocked rotor test results for determining the equivalent circuit parameters. The model is used to simulate various performance characteristics. these characteristics can be viewed...
DC motor Control using lag compensation and PID
To customize this code you just need to:
1- Change the values of DC motor constants
2- Determine settling time, PO% and SSE and Change the zeros of lag compensation
3- Tune the...
This model simulates the position control of a DC motor. Parameters can be changed from the model properties tag.
This script can be used to control motors connected to Roboteq motor controller. Right now the code is for controllers which are accessed over a local tcp/ip network. Replace the ip address with yours. That should be enough to run the motors.
This project aims to demonstrate speed control of a
DC series motor. It involves the use of armature voltage control,
to control the speed of the motor. The speed of the motor is
controlled for a typical speed profile of a washing...
Program given here computes the discrete transfer function of a DC motor (Example taken in this case) using pseudo inverse technique. The input and output data for any single input single output system can be used to find out the discrete transfer...
In this model we have design a full
control(Armature and Field) of DC Motor.
simulink model of Induction Motor
Inductance of the armature L = 0,1
H, resistance of the armature R = 2 W, voltage U = 110 V, load torque mz = 0,02 Nm, moment
of inertia J = 0,1 kg/m2 and electro-mechanical constant of the motor k = 0,3 Vs. Create it as
design SVPWM for 3 level inverter for speed control of Induction motor based on V/F method
V/F control of Induction motor with SVPWM based 3-level inverter
This Plugin is designed to manage motor sport races and championships and allow users to predict the outcome of the races. Points are awarded based on users' predictions and the actual finishing order of the race.
Most motor sport...
This is the demo file for video demo:
and "Seth on Simulink" blog post "PID Control Made Easy":
Dynamic simulation of a star delta start of an asynchronous motor. The switching from star to delta is done manually with a switch in the model. Visible are stator current, speed, motor torque and load torque
Here we have modelled a five-phase induction motor and we have applied DTC control technique to the machine
The files include a number of Simulink(R) models with different controllers for a DC motor. There is also a document included that describes the different controllers PID and pole placement with state feedback. The models can serve as a starting...